|
|
What are you shopping for? |
|
|
| ||||
|
3/4 x 12 Cold Chisel By Dasco Products* Forged of hard,, high carbon steel * Added length over other brands for convenience * Blue rust-resistant finish * Targethead design increases striking area * Made in USA * 3/4 x 12,, large |
$10.02 UPC: 018371041003 |
||
|
Angle Finder By Dasco Products Angle Finder* Base and side V-grooved for easier use on round surfaces * Body of high impact ABS plastic-dial protected by clear,, tough acrylic cover * Angle and grade chart shows angles in degrees and converts them to pitch per inch and pitch per foot * No via |
$9.89 UPC: 018371100007 |
||
|
Angle Finder With Magnet Dasco Products Angle Findr W/magnet* ABS plastic angle finder line * Magnetic base V-grooved for accurate readings on round surfaces * Big 4 dial is easy to read * Angle and grade chart on back * No vial |
$16.92 UPC: 018371700009 |
||
|
Center Punch 5/16* Makes accurate hole starting easily * Sharp points ground and heat treated * 0530-0: 1/4 * 0531-0: 5/16 * 0532-0: 7/16 * 0534-0: 1/2 |
$4.69 UPC: 018371053105 |
||
|
DASCO 1/16 x 4 1/2 High Carbon Steel Pin Punch* Forged from tough,, high-carbon steel * 4-1/2,, point size 1/16 |
$5.04 UPC: 018371059206 |
||
|
DASCO 1/2 x 6 3/8 Cold Chisel* Heat treated,, high carbon steel construction * Exclusive target head design * For use on metals softer than the cutting edge such as cast iron,, bronze,, copper,, steel,, and wrought iron * 1/2 x 6-3/8 |
$6.10 UPC: 018371040501 |
||
|
DASCO 3/4 x 12 Concrete Chisel* High grade steel bull point * Use for cutting through,, and breaking up concrete * Made with forged target head to speed hammering * 3/4 x 12 |
$12.91 UPC: 018371048002 |
||
|
DASCO 1 3/4 Mason's Chisel* Forged from strong,, tough,, high carbon steel * Thin,, strong blade assures clean cuts * For cutting cement block,, brick,, and veined stone * 7-1/2 length * 1-3/4 |
$9.84 UPC: 018371033305 |
||
|
DASCO 1 x 7 7/8 Cold Chisel* Heat treated,, high carbon steel construction * Exclusive target head design * For use on metals softer than the cutting edge such as cast iron,, bronze,, copper,, steel,, and wrought iron * 1 x 7-7/8 |
$10.61 UPC: 018371041706 |
||
|
DASCO 1-1/4 Mason's Chisel* Forged from strong,, tough,, high carbon steel * Thin,, strong blade assures clean cuts * For cutting cement block,, brick and veined stone * 7-1/2 length * 1-1/4 |
$9.57 UPC: 018371033206 |
||
|
DASCO 1/2 Star Drill Chisel* High carbon steel construction to provide true size holes,, fast drilling and long service * Exclusive target head design allows harder,, surer hammer blows by increasing striking area and reducing spalling and mushrooming * Used for chiseling hole |
$7.42 UPC: 018371363501 |
||
|
DASCO 1/4 x 12 Star Drill Chisel* High carbon steel construction to provide true size holes,, fast drilling and long service * Exclusive target head design allows harder,, surer hammer blows by increasing striking area and reducing spalling and mushrooming * Used for chiseling hole |
$6.85 UPC: 018371362108 |
||
|
DASCO 1/4 x 6 High Carbon Steel Pin Punch* Forged from tough,, high-carbon steel * 6,, point size 1/4 |
$6.06 UPC: 018371058902 |
||
|
DASCO 1/8 x 5 1/2 High Carbon Steel Pin Punch* Forged from tough,, high-carbon steel * 5-1/2,, point size 1/8 |
$5.23 UPC: 018371058209 |
||
|
DASCO 2 1/4 Mason's Chisel* Forged from strong,, tough,, high carbon steel * Thin,, strong blade assures clean cuts * For cutting cement block,, brick,, and veined stone * 7-1/2 length * 2-1/4 |
$11.41 UPC: 018371033404 |
||
|
DASCO 2 3/4 Mason's Chisel* Forged from strong,, tough,, high carbon steel * Thin,, strong blade assures clean cuts * For cutting cement block,, brick,, and veined stone * 7-1/2 length * 2-3/4 |
$12.02 UPC: 018371033503 |
||
|
DASCO 2 x 10 Floor Chisel* Thin cutting blade * Used for tough cutting and trimming of hard or soft woods * Also removes tongue and groove flooring * 2 x 10 |
$12.38 UPC: 018371047104 |
||
|
DASCO 2-1/2 Brick Layers Set* Ideal tool for cutting brick * Overall length: 7 * 2-1/2 |
$9.58 UPC: 018371043403 |
||
|
DASCO 2-1/2 x 10 Floor Chisel* Thin cutting blade * Used for tough cutting and trimming of hard or soft woods * Also removes tongue and groove flooring * 2-1/2 x 10 |
$13.62 UPC: 018371047203 |
||
|
DASCO 3 1/2 x 7 Brick Layers Chisel* Ideal tool for cutting brick * 7 overall length * 3-1/2 |
$10.79 UPC: 018371043601 |
||
|
DASCO 3 x 11 Floor Chisel* Thin cutting blade * Used for tough cutting and trimming of hard or soft woods * Also removes tongue and groove flooring * 3 x 11 |
$15.46 UPC: 018371047302 |
||
|
DASCO 3 x 7 Brick Layers Chisel* Ideal tool for cutting brick * 7 overall length * 3 |
$10.27 UPC: 018371043502 |
||
|
DASCO 3/16 x 5 1/2 High Carbon Steel Pin Punch* Forged from tough,, high-carbon steel * 5-1/2,, point size 3/16 |
$5.45 UPC: 018371058407 |
||
|
DASCO 3/4 Star Drill Chisel* High carbon steel construction to provide true size holes,, fast drilling and long service * Exclusive target head design allows harder,, surer hammer blows by increasing striking area and reducing spalling and mushrooming * Used for chiseling hole |
$9.67 UPC: 018371365109 |
||
|
DASCO 3/4 x 7 1/8 Cold Chisel* Heat treated,, high carbon steel construction * Exclusive target head design * For use on metals softer than the cutting edge such as cast iron,, bronze,, copper,, steel,, and wrought iron * 3/4 x 7-1/8 |
$7.72 UPC: 018371040808 |
||
|
DASCO 3/8 x 5 5/8 Cold Chisel* Heat treated,, high carbon steel construction * Exclusive target head design * For use on metals softer than the cutting edge such as cast iron,, bronze,, copper,, steel,, and wrought iron * 3/8 x 5-5/8 |
$5.42 UPC: 018371040204 |
||
|
DASCO 3/8 x 5 Prick Punch* For marking and layout work * Polished taper,, tough,, and heat treated * 3/8 x 5 |
$5.05 UPC: 018371054102 |
||
|
DASCO 5/16 x 5 1/4 Cold Chisel* Heat treated,, high carbon steel construction * Exclusive target head design * For use on metals softer than the cutting edge such as cast iron,, bronze,, copper,, steel,, and wrought iron * 5/16 x 5-1/4 |
$5.28 UPC: 018371040105 |
||
|
DASCO 5/32 x 5 1/2 High Carbon Steel Pin Punch* Forged from tough,, high-carbon steel * 5-1/2,, point size 5/32 |
$5.45 UPC: 018371058308 |
||
|
DASCO 5/8 Star Drill Chisel* High carbon steel construction to provide true size holes,, fast drilling and long service * Exclusive target head design allows harder,, surer hammer blows by increasing striking area and reducing spalling and mushrooming * Used for chiseling hole |
$8.07 UPC: 018371364300 |
|
|
||||
|
|
