|
|
What are you shopping for? |
|
|
| ||||
|
Mo-Clamp 0100 B-ClampFeatures and Benefits: Gripping surface: 2-1/4" wide (57 mm), 1" deep (25 mm) Overall length: 9-1/2" (241 mm) Weight: 7 lbs (3.18 kg) Capacity: 6 tons (5,443 kg) Heat Treated SteelSelf-Tightening. The body-mans right arm |
$123.97 UPC: |
||
|
Mo-Clamp 0250 Mini C-ClampFeatures and Benefits: Self-tightening Small, light, versatile Has a minimum of 1-1/2" throat clearance to reach around flanges, cowls, pinch welds and lips Butts against panels where only narrow bite is available Made of he |
$110.97 UPC: |
||
|
Mo-Clamp 0480 135 Degree Swivel ClampFeatures and Benefits: Gripping surface: 2" wide (51 mm) Overall length: 5" (127 mm) Weight: 5.7 lbs (2.6 kg) Capacity: 5 tons (4,536 kg) Made of heat treated steelNew generation of Mo-Clamps that are self-tightening. P |
$142.97 UPC: |
||
|
Mo-Clamp 0655 Dyna-Mo Box ClampFeatures and Benefits Manufactured from heat treated steel - provides secure grip Smaller designed box clamp to get around flanges and other obstructions Severe duty tooth design for aggressive pulling Gripping surface: 1-1/4 in. wide |
$115.97 UPC: |
||
|
Mo-Clamp 0660 Long Nose ClampFeatures and Benefits: Similar to the popular # 0300 Jr. Clamp, the Long Nose is self-tightening and includes the original wedge Cross hatch tooth design, spring loaded for easy opening, deeper reach for hard-to-get-to areas Gripping sur |
$109.97 UPC: |
||
|
Mo-Clamp 0680 Big Mouth ClampFeatures and Benefits: Self-tightening A perfect solution for hard-to-get-to areas Great where large opening is needed Original wedge; cross-hatch tooth design; spring loaded for easy opening Throat clearance of 2-1/4" high, |
$130.97 UPC: |
||
|
Mo-Clamp 0805 Tac-N-Pull Pull Plate KitFeatures and Benefits: For use with the 0800 Tack-n-pull clamp (not included) Reusable plates Includes the following: (10) 0801 1" Pull Plates, (5) 0802 1" Pull Plates, and (5) 0803 3" Pull Plates Heat-treat |
$66.97 UPC: |
||
|
Mo-Clamp 1250 Panel Puller1250Panel PullerFeatures and Benefits:Light and easy to use with slide hammer or pulling post |
$65.97 UPC: |
||
|
Mo-Clamp 1300 Sill HookFeatures and Benefits: Heat treated steel Weight: 5 lbs (2.27 kg) Capacity: 5 tons (4,536 kg) Gripping surface: 2" wide (63 mm), 1" deep (25 mm) Overall length: 8" (216 mm)One of the handiest tools in the shop for a |
$95.97 UPC: |
||
|
Mo-Clamp 1340 Bolt PullerFeatures and Benefits Made for suspension and frame bolts that are hard to reach for realigning or straightening 2.5 tons of pulling capacity Made from Tru-Tuff steel alloy Made in the USAThe Bolt Puller is designed to allow the technici |
$61.97 UPC: |
||
|
Mo-Clamp 135 Degree Swivel Clamp - MOC0480Features And Benefits: Gripping Surface: 2" Wide (51 Mm) Overall Length: 5" (127 Mm) Weight: 5.7 Lbs (2.6 Kg) Capacity: 5 Tons (4,536 Kg) Made Of Heat Treated Steel New Generation Of Mo-clamps That Are Self-tightening. Provides Multi-angle Pulling Fr |
$131.99 UPC: 842729011048 |
||
|
Mo-Clamp 1350 Versa HookFeatures and Benefits:The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa H |
$150.97 UPC: |
||
|
Mo-Clamp 1850 Inline SliderFeatures and Benefits: Gripping Surface: 3" (76 mm) Overall Length: 7" (178 mm) Weight: 3.4 lbs (1.54 kg) Capacity: 5 tons (4,536 kg)This is a new generation of Mo-Clamps, self-tightening. Made of heat- treated alloy steel |
$123.97 UPC: |
||
|
Mo-Clamp 3100 Sheet Metal Hook Set - 4-PackFeatures and Benefits: Alloy heat-treated hooks increase pulling options May be used with the #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps Weight: approximately 2 lbs. each; capacity: 2 tons Made of hea |
$208.97 UPC: |
||
|
Mo-Clamp 3120 Small Round Nose Sheet Metal HookFeatures and Benefits: Alloy heat treated increase pulling options May be used with hole pull plates (0810 & 0820) to pull, or use in combination with clamps.Specs: Weight approx: 2 Lbs (.91 kg) Capacity 2 Tons (1,814 kg)Replacem |
$64.97 UPC: |
||
|
Mo-Clamp 3130 Large Flat Nose Sheet Metal HookFeatures and Benefits: Large flat nose Made of alloy heat-treated Weight: approximately 2 lbs (.91 kg) Capacity: 2 tons (1,814 kg)This is a replacement hook for the 3100 set. Its used to pull, or to use in combination wit |
$73.97 UPC: |
||
|
Mo-Clamp 3200 Fixed Head Sheet Metal Hook Set - 4-PackFeatures and Benefits: Alloy heat-treated hooks increase pulling options May be used with Hole Pull plates or combination with clamps Includes small round nose, small flat nose, large round nose and large flat nose hooks Made in the U.S.A |
$150.97 UPC: |
||
|
Mo-Clamp 4010 Frame Rack / Unibody ClampFeatures and Benefits: Gripping surface: 8" wide Made of heat-treated steel Weight: 19 lbs (8.62 kg) Overall length: 14" (368 mm) Capacity: 5 tons (4,536 kg)This has bar holes and is designed for three ways of pulling, using |
$216.97 UPC: |
||
|
Mo-Clamp 4020 Four Way Pull ClampFeatures and Benefits: Clamp has recessed pcokets to hold bolts stationary for easy tightening Includes #4043 Oval Loop Gripping surface: 4" wide; 3/4" deep Overall length: 8"; weight: 12 lbs. Capacity: 6 tons Mad |
$154.97 UPC: |
||
|
Mo-Clamp 4030 Three-Way Pull ClampFeatures and Benefits: Clamp has recessed pockets to hold bolts stationary for easy tightening Includes #4043 Oval Loop Gripping surface: 4" wide, 1/2" deep Overall length: 8"; weight: 8 lbs. Capacity: 6 tons Made |
$125.97 UPC: |
||
|
Mo-Clamp 4049 Frame WrenchFeatures and Benefits Manufactured from heat treated steel Allows easy access to the bends and waves resulting from frame straightening Helps in achieving the "pre-accident condition" look Two different angles to access the diff |
$69.97 UPC: |
||
|
Mo-Clamp 4052 Triangle for Double LooperFeatures and Benefits: Weight: 1lb. (.45kg) Capacity: 5 Tons (4,536 kg) |
$23.97 UPC: |
||
|
Mo-Clamp 4055 Screw Pin Shackle - 7/16-inch4055Screw Pin Shackle 7/16"Features and Benefits:For use with MOC4013, MOC4011, MOC4012, MOC5800, and the New MOC5910Weight: 1lb. (.45Kg)Working load limit: 9,000 lbs. |
$19.97 UPC: |
||
|
Mo-Clamp 4120 Double Claw HookFeatures and Benefits: Overall Length: 5" (127 mm) Weight: 2 lbs (.91 kg) Capacity: 6 tons (5,443 kg) Heat-treated steelThis is used as an accessory with draw bars or chain. Use a pair with triangle or oval loop as a chain sort |
$52.97 UPC: |
||
|
Mo-Clamp 4145 Welded Double ClevisFeatures and Benefits: Overall Length: 8" (222mm) Weight: 3 lbs. (1.36kg) Capacity: 10 Tons (9,072 kg) Made of heat treated steelThis time saving tool allows for an easy connection to a 3/8" chain. Simple to use and handy |
$57.97 UPC: |
||
|
Mo-Clamp 4146 Double Grab Hook AssemblyFeatures and Benefits: Hook-up to any section of 3/8" chain Overall Length: 9" (241mm) Weight: 3lbs (1.36kg) Capacity: 7 tons (6,350 kg) Made of heat treated steelThis allows for a quick and easy hook-up. It has a grab |
$59.97 UPC: |
||
|
Mo-Clamp 5616 Door Post Puller / TwisterFeatures and Benefits: Overall length: 5" (133mm) Weight: 2 lbs (.91kg) Capacity: 2 tons (1,814kg) Made of heat-treated steel Made in the USADo you need a little twist in your pull? If so, this is the perfect tool! Wit |
$63.97 UPC: |
||
|
Mo-Clamp 5622 Strut Tower ChainFeatures and Benefits: Many different shop uses Use in correction of strut towers For attachment to existing bolt holes Designed for use with 3/8" chain Made of heat treated steel, and made in the U.S.A. Overall length: 19& |
$48.97 UPC: |
||
|
Mo-Clamp 5623 Hinge PlateFeatures and Benefits: Use in existing holes in frame structures or body panels Comes with #5626 3/8" Shackle for angle pulls Made of heat treated steel, made in the U.S.A. Overall length: 4"; weight: 2 lbs. Capacity: 3 |
$59.97 UPC: |
||
|
Mo-Clamp 5710 Mo-Block Dolly for Frame RailFeatures and Benefits: Overall Length: 11" (280mm) Weight: 6 lbs (2.72kg) Made of heat-treated steel Made in the USAStraighten frame rails in about 80 percent of front-end damage cases. Inserted into the frame rail pocket, the d |
$79.97 UPC: |
|
|
||||
|
|
