|
|
What are you shopping for? |
|
|
| ||||
|
Palmgren 0.5 Ton Arbor Press - 61051Single Leverage 1/2 Ton Arbor Press For General Use Such As Riveting, Pressing, Squeezing, Punching And Bending In Repair And Production Work. Swing: 7-1/2 Inches. Anvil Dia.: 3-3/8 Inches. Ram Dim.: 3/4" X 3/4 Inches. Max. Work Hgt.: 4-5/8 Inches. B |
$64.99 UPC: 726420748796 |
||
|
Palmgren 10 Rotary Tilting Cross Slide TableTable Top Is Ground To 0.001 Inches Total Indicator Reading Is Graduated A Full 360 Degrees And Has Two 5/8 Inches Table Slots At 90 Degrees. The Table May Be Used To Position Or To Actively Feed Under The Machine Spindle. Heavy Handles Permit Smooth |
$1189.99 UPC: 726420748710 |
||
|
Palmgren 12 x 6 Cross Slide Table - 37124This Model Has A Single Longitudinal T-slot With Three Transverse 3/8 Inches T-slots. Table Travel Is 8.0 Inches X 4-1/2 Inches. |
$842.99 UPC: 726420748765 |
||
|
Palmgren 17 Bench 12 Speed Drill Press - 80171Long Rack And Pinion Quill Travel For Deep Operations. Heavy, Cast Metal Quill Handle With Rubber Grips For Comfortable Use. Rapid, Easy Speed Changes With Swing-mounted Motor And Twelve-speed V-belt System. Prewired For 115v But Are Dual Voltage Des |
$496.99 UPC: 726420748918 |
||
|
Palmgren 2-3/8 General Purpose Angle ViseVise Is Equipped With One Plain And One Horizontally/vertically Grooved Jaw Plate For Holding Round Pieces. Vise Is Equipped With One Plain And One Horizontally/vertically Grooved Jaw Plate For Holding Round Pieces. |
$125.99 UPC: 726420748475 |
||
|
Palmgren 20 Floor 12 Speed Drill Press - 80206Base, Motor Housing And End-shields Made From Cast Iron, Cast Aluminum And Steel (depending On The Model) Csa Nrtl/c Certified (except 3-phase Units), Osha Compliant. When Accurate Drilling Is Required, These Palmgren Drill Presses Are Neccesity, The |
$818.99 UPC: 726420748932 |
||
|
Palmgren 6 Swivel Machine ViseTwo Bolts And Steel Swivel Base Plate Provide Positive Locking Of The Body At The Required Angle. The Base Has 5/8 Inches Keyway And Two Bolt Slots For Locating And Mounting On The Machine Table. Vise Is Excellent For Milling, Grinding, Drilling And |
$368.99 UPC: 726420748598 |
||
|
Palmgren 7 Bench GrinderBase, Motor Housing And End-shields Made From Cast Iron, Cast Aluminum And Steeel (depending On The Model) Csa Nrtl/c Certified (except 3-phase Units), Osha Compliant. For General Purpose Grinding, Including Sharpening, Shaping, De-burring, Stock Rem |
$165.99 UPC: 726420748970 |
||
|
Palmgren 8 Rotary Tilting Cross Slide Table - 32804Table Top Is Ground To 0.001 Inches Total Indicator Reading Is Graduated A Full 360 Degrees And Has Two 5/8" Table Slots At 90 Degrees. The Table May Be Used To Position Or To Actively Feed Under The Machine Spindle. Heavy Handles Permit Smooth Movem |
$1053.99 UPC: 726420748703 |
|
|
||||
|
|
