|
|
What are you shopping for? |
|
|
| ||||
|
1/4 X 1 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 1/4 Inches. Maximum Fixture Thickness: 1/4 Inches. Minimum Embedment: 3/4 Inches. Minimum Hole Depth;1-1 |
$8.99 UPC: |
||
|
|
1/4 X 1-1/2 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 1/4 Inches. Maximum Fixture Thickness: 3/4 Inches. Minimum Embedment: 3/4 Inches. Minimum Hole Depth;1-3 |
$11.99 UPC: |
||
|
|
1/4 X 1-1/4 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 1/4 Inches. Maximum Fixture Thickness: 1/2 Inches. Minimum Embedment: 3/4 Inches. Minimum Hole Depth;1-1 |
$9.99 UPC: |
||
|
1/4 x 1-3/4 Truboltandreg Wedge Anchor (Box of 100)Fully Threaded Design Allows A Large Range Of Embedment And Fixture Thickness . Length Id Stamp Provides For Embedment Inspection After Installation. Cold-formed Manufacturing Process Adds Strength. Features A Stainless Steel Expansion Ringthread Len |
$22.99 UPC: |
||
|
|
1/4 X 2 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 1/4 Inches. Maximum Fixture Thickness: 1-1/4 Inches. Minimum Embedment: 3/4 Inches. Minimum Hole Depth;2 |
$13.99 UPC: |
||
|
|
1/4 X 3/4 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 1/4 Inches. Maximum Fixture Thickness: 1/8 Inches. Minimum Embedment: 5/8 Inches. Minimum Hole Depth;1 I |
$8.59 UPC: |
||
|
|
3/16 X 7/8 Hammer Set (Box of 100)Fast, Easy Installation. Works In Concrete, Block And Brick. Install Through Material To Be Fastened . Low Profile Mushroom Head Styledrill Size: 3/16 Inches. Maximum Fixture Thickness: 1/4 Inches. Minimum Embedment: 5/8 Inches. Minimum Hole Depth;1- |
$7.99 UPC: |
||
|
3/8 X 1-3/4 Tapconandreg LDT Large Diameter Tapcon Anchor (Box of 50)Installs In Less Than Half The Time Of Wedge Anchors Or Adhesive Anchors. Simply Drill A Pilot Hole And Drive The Ldt Anchor By Hand Or Impact. No Torching Or Grinding Required To Remove Anchors. Use Standard Ansi Bits Instead Of Proprietary Bits . S |
$19.99 UPC: |
||
|
3/8 x 2-7/8 Stainless Steel Sleeve Anchors (Box of 50)Sleeve Type Anchors Feature A Split Expansion Sleeve Over A Threaded Stud Bolt Body And Integral Expander, Nut And Washer. Provides Full 360-degree Hole Contact Over Large Area To Reduce Concrete Stress. Made Of Type 18-8 Stainless Steel. Anchor Diam |
$150.65 UPC: |
||
|
3/8 x 4 Stainless Steel Sleeve Anchors (Box of 50)Sleeve Type Anchors Feature A Split Expansion Sleeve Over A Threaded Stud Bolt Body And Integral Expander, Nut And Washer. Provides Full 360-degree Hole Contact Over Large Area To Reduce Concrete Stress. Made Of Type 18-8 Stainless Steel. Anchor Diam |
$187.18 UPC: |
||
|
A7 10 Fluid Ounce Cartridge with NozzleIncredibly Fast Dispensing And Rod Installation Times. Significantly Faster Curing Times. Easy To Use (no-heating) Even At Freezing Cold Temperatures. Requires Less Adhesivesize: 10 Ounces. Curing Time;35 Min At 60 Degrees |
$15.99 UPC: |
||
|
A7 28 Fluid Ounce Cartridge with NozzleIncredibly Fast Dispensing And Rod Installation Times. Significantly Faster Curing Times. Easy To Use (no-heating) Even At Freezing Cold Temperatures. Requires Less Adhesivesize: 28 Ounces. Curing Time;35 Min At 60 Degrees |
$26.99 UPC: |
||
|
A7-28 Injection Tool DispenserAcrylic Adhesive Dispenser . Reusable Material Metal . Color Black . Use With 28 Oz Cartridgeitem: Acrylic Adhesive Dispenser. Type: Reusable. Material: Metal. For Use With;28 Ounce Acrylic Cartridge |
$149.99 UPC: |
||
|
C6 18 Ounce Fast Curing EpoxyOne Formula For Both Solid And Hollow Base Materials. C6 Has Been Used On Projects All Over The World For Over 15 Years. Fast Curing Epoxy For All Conditions. The Hardner And Resin Are Completely Mixed As They Are Dispensed From The Dual Cartridge Th |
$89.99 UPC: |
||
|
Condrive 1000 Installation ToolFast Change From Drilling To Driving. Eliminates Need To Change Out Chuck And Bits. Eliminates Need For Two Tools. Special Nut Driver Is Recessed For Torque Control To Reduce Head Breakage. Includes Bits For All Sizes Hex And Phillips Headdrill Adapt |
$46.99 UPC: |
||
|
E-Z Ancor Self-Drilling Drywall AnchorsFast, No Pre-drilling. Easy, Just Use #2 Phillips Bit. Clean And Neat, Tri-cut Point Drills A Small Hole And Seats Flush. Corrosion Resistance. Removable, Easily Backed Out Of Wallboard. Breakaway Point For Easy Usage When Cavity Is Shallowmaterial: |
$12.99 UPC: |
||
|
E-Z Ancor Self-Drilling Drywall Anchors (Plastic)Fast, No Pre-drilling. Easy, Just Use #2 Phillips Bit. Clean And Neat, Tri-cut Point Drills A Small Hole And Seats Flush. Corrosion Resistance. Removable, Easily Backed Out Of Wallboard. Breakaway Point For Easy Usage When Cavity Is Shallowmaterial: |
$9.99 UPC: |
||
|
Hammer Set Anchor Hammer Set 1/4 By 1 1/2 15 Pack 35203 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 1-1/2 Pack Of 15 |
$9.59 UPC: 092097352032 |
||
|
Hammer Set Anchor Hammer Set 1/4 By 1 1/2 50 Pack 35303 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 1-1/2 Pack Of 50 |
$12.29 UPC: 092097353039 |
||
|
Hammer Set Anchor Hammer Set 1/4 By 1 25 Pack 35200 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 1 Pack Of 25 |
$9.69 UPC: 092097352001 |
||
|
Hammer Set Anchor Hammer Set 1/4 By 1 75 Pack 35300 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 1 Pack Of 75 |
$15.39 UPC: 092097353008 |
||
|
Hammer Set Anchor Hammer Set 1/4 By 2 15 Pack 35205 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 2 Pack Of 15 |
$9.19 UPC: 092097352056 |
||
|
Hammer Set Anchor Hammer Set 1/4 By 2 50 Pack 35305 by Red HeadMasonry Anchors Light Duty "hammer-set" Size Ins.=1/4 X 2 Pack Of 50 |
$14.39 UPC: 092097353053 |
||
|
Multi-Set 1/2 Drop In Anchor (Box of 50)Lipped Anchor Body Keeps Anchor Flush . Easy Installation. Keeps All Rods Same Length. Easy Inspection. Available In Carbon Steel, 18-8 And 316 Stainless Steelbolt Size: 1/2 Inch. Threads Per Inch: 13. Drill Bit Size: 5/8 Inch. Thread Depth: 3/4 Inch |
$25.99 UPC: |
||
|
|
Multi-Set 1/4 Drop In Anchor (Box of 100)Lipped Anchor Body Keeps Anchor Flush . Easy Installation. Keeps All Rods Same Length. Easy Inspection. Available In Carbon Steel, 18-8 And 316 Stainless Steelbolt Size: 1/4 Inch. Threads Per Inch: 20. Drill Bit Size: 3/8 Inch. Thread Depth: 3/8 Inch |
$22.99 UPC: |
||
|
Multi-Set 3/4 Drop In Anchor (Box of 25)Lipped Anchor Body Keeps Anchor Flush . Easy Installation. Keeps All Rods Same Length. Easy Inspection. Available In Carbon Steel, 18-8 And 316 Stainless Steelbolt Size: 3/4 Inch. Threads Per Inch: 10. Drill Bit Size: 1 Inch. Thread Depth: 1-1/4 Inch |
$54.99 UPC: |
||
|
|
Multi-Set 3/8 Drop In Anchor (Box of 50)Lipped Anchor Body Keeps Anchor Flush . Easy Installation. Keeps All Rods Same Length. Easy Inspection. Available In Carbon Steel, 18-8 And 316 Stainless Steelbolt Size: 3/8 Inch. Threads Per Inch: 16. Drill Bit Size: 1/2 Inch. Thread Depth: 1/2 Inch |
$13.99 UPC: |
||
|
Multi-Set 5/8 Drop In Anchor (Box of 25)Lipped Anchor Body Keeps Anchor Flush . Easy Installation. Keeps All Rods Same Length. Easy Inspection. Available In Carbon Steel, 18-8 And 316 Stainless Steelbolt Size: 5/8 Inch. Threads Per Inch: 11. Drill Bit Size: 7/8 Inch. Thread Depth: 1 Inch. |
$32.99 UPC: |
||
|
Red Head Anchor Poly Set 1 1/4 25 Pack 35220 by Red HeadMasonry Poly Set Anchors Light Duty "red Head" Size Ins=1-1/4 Pack Of 25 |
$6.69 UPC: 092097352209 |
||
|
Red Head Anchor Poly Set 1 7/16 20 Pack 35225 by Red HeadMasonry Poly Set Anchors Light Duty "red Head" Size Ins=1-7/16 Pack Of 20 |
$6.79 UPC: 092097352254 |
|
|
||||
|
|
