|
|
What are you shopping for? |
|
|
| ||||
|
Steck Manufacturing 17000 Door JammerFeatures and Benefits: Hold the door open while you hammer, pull, grind, sand or paint For door and deck lids Hold solid Fits any size latch |
$26.97 UPC: |
||
|
Steck Manufacturing 17100 Hatch Jammer Lift Gate and Hatch HolderFeatures and Benefits: Allows body shop technicians to hold lift gate or hatch in a partially open position for sanding, painting or buffing including being able to work on the edges of the panel Hatch Jammer easily adjusts the work angle of |
$33.97 UPC: |
||
|
Steck Manufacturing 17150 Xtension Tube for Hatch JammerFeatures and Benefits: Hatch Jammer Xtension Tube easily fits inside the Hatch Jammer and adjusts the work angle of the hatch door from 15” to 21” to 34” and to full extension of 59” The Hatch Jammer with the Hatch Jammer X |
$34.97 UPC: |
||
|
Steck Manufacturing 17200 Hatch Jammer XL Prop and Extension TubeFeatures and Benefits: Hatch Jammer XL easily adjusts the work angle of the hatch door from 15” to 21” to 34” and to full extension of 59” The Hatch Jammer XL will stabilize the hatch for easier prep and painting of t |
$68.97 UPC: |
||
|
Steck Manufacturing 20000 Original Pull Rod SetFeatures and Benefits: Super tough alloy steel is precisely heat-treated for maximum strength Every Steck Pull Rod and Pick Pull is factory tested under a 500 pound (228 kg) load. Vinyl coated handle is comfortable to use Includes: |
$43.97 UPC: |
||
|
Steck Manufacturing 20014 Stud LeverFeatures and Benefits: Accurate controlled pulls every time Grips studs (pull pins) quickly and easily Standard tool works on both 2.2 and 2.6 mm studs as close as 3/8" apart Black pivoting base helps compress crown as dent is p |
$53.97 UPC: |
||
|
Steck Manufacturing 20015SB Seam Buster Spot Weld ChiselFeatures and Benefits: Chisel tip for starting seam separation Chisel edge for easily moving along seam Easily separate spot welded or bonded panels Save up to 15 minutes per panel replacement For quarter panels, rockers and any |
$32.97 UPC: |
||
|
Steck Manufacturing 20016 Right Angle SeamBusterFeatures and Benefits Easily separates hard-to-reach spot welded or bonded panels Sharpened on three edges, the sharp end allows for penetration between the panels and both side edges allow for side impact to drive the panels apart without dama |
$35.97 UPC: |
||
|
Steck Manufacturing 20017 Super SeamBusterFeatures and Benefits: The Super SeamBuster can now be driven by means of an air hammer to separate spot welded or bonded panels The Super SeamBuster is designed to attach to any air hammer for faster and more efficient separating of quar |
$52.97 UPC: |
||
|
Steck Manufacturing 20022 Quarter PullerFeatures and Benefits: Pulls Rear Quarter and Wheel Well Hooks above the lip of the wheel opening Two curvatures (one on each side) will fit almost all cars Easier and faster than clamps or jacks 3000 lb. max. pull |
$53.97 UPC: |
||
|
Steck Manufacturing 20033 Small Quarter Puller QP2Features and Benefits: Hooks above the lip of the wheel opening Two curvatures (one on each side) will fit almost all cars Easier and faster than clamps or jacks 3000 lb. maximum pull For smaller openings |
$36.91 UPC: |
||
|
Steck Manufacturing 20037 Flange LeverFeatures and Benefits: Unique double ended reverse 1/4“ hook design made from hardened alloy steel gives the technician easy access to buckled metal edges Flat hook allows for easy manual alignment while the 35° angle bar allows te |
$24.97 UPC: |
||
|
Steck Manufacturing 20046 Panel Shaper Kit - 3-PieceFeatures and Benefits: Air Hammer driven set of three self lubricating Nylon reinforced heads that allow the technician to easily access deep reach areas and badly deformed sheet metal surfaces to form them back to original shapes Each kit c |
$55.97 UPC: |
||
|
Steck Manufacturing 20055 Fender FixerFeatures and Benefits: Collision force to one front fender often travels through the hood to push out the top of the opposite fender The Fender Fixer rolls that fender top back into shape in just minutes |
$62.97 UPC: |
||
|
Steck Manufacturing 20085 EZ Pull PliersFeatures and Benefits Allows body shop technicians quick access to grip and pull multiple pull pins (studs) as well as vertical and horizontal flanges Tough alloy steel locking pliers with its 3-1/2” x 1” vice jaw provides an eve |
$54.97 UPC: |
||
|
Steck Manufacturing 20099 Pogo IIFeatures and Benefits: Fast leverage pulling and one handed operation Core supports repaired quickly Hook bolt heads, flanges, anywhere Fits in your toolbox (over all length 18-3/8") |
$69.97 UPC: |
||
|
Steck Manufacturing 20222 Handy Pull KitFeatures and Benefits: Allow a technician to perform light duty pulling of tapped holes in automotive body structures as well as proper hood and trunk alignment Contains three metric (6mm, 8mm and 10mm) eyebolts, 3-1/4” metal Offset Hi |
$43.97 UPC: |
||
|
Steck Manufacturing 20350 The Pro StepFeatures and Benefits Heavy Duty (500 lb. cap.) Platform (32" x16") Foam bumpers protect vehicle finish Spring loaded retractable wheels, you can push it with your foot Extra-wide (23") base rails for stability Hei |
$154.97 UPC: |
||
|
Steck Manufacturing 21542 E-Z Strip II Molding KitFeatures and Benefits: New and improved version of our E-Z Strip Molding Tool with a 3” non-marring blade and steel air hammer arbor to remove body side moldings. Durable non-marring wedge design made from Polypropylene removes moldings with |
$32.97 UPC: |
||
|
Steck Manufacturing 21600 Antenna WrenchFeatures and Benefits: Fits most antenna bezel nuts- domestic and foreign Simple and compact Compared to a socket set, its easier to carry and use Rugged steel construction for many years of use |
$21.97 UPC: |
||
|
Steck Manufacturing 21720 Sure Grip Trim Clip PliersFeatures and Benefits: Won’t break clips Works faster and easier Works on trim pads, hood insulation, etc. |
$27.97 UPC: |
||
|
Steck Manufacturing 21825 Bushing ToolFeatures and Benefits: Bushing tool’s off-set design allows for easy access to both door half and body half hinges to easily punch out bushings and maintains bushing alignment for quick installation Saves technicians up to 20 minutes p |
$22.97 UPC: |
||
|
Steck Manufacturing 21835 Door Hinge Pin PopperFeatures and Benefits: Removes door hinge pins FAST drives out even stubborn hinge pins Direct impact clearance for door panels Works on all GM cars with removable hinge pins Includes PIN PULLER to remove loosened pins |
$28.97 UPC: |
||
|
Steck Manufacturing 21845 EZ Store Door Alignment ToolFeatures and Benefits: Finally, a convenient door aligning tool Saves space, fits easily into your tool drawer. No long, heavy bar to store. Uses your breaker bar for leverage Save time, you wont have to hunt for the shop tool |
$29.97 UPC: |
||
|
Steck Manufacturing 21870 E-Z Rest Door HangerFeatures and Benefits: Easy on/off design and fully adjustable Quickly adapts to most floor jacks with removable saddles Hang bumpers, store glass, many other uses Fits jacks with saddle hole dimensions of 1.17" - 1.19" Th |
$176.98 UPC: |
||
|
Steck Manufacturing 21890 Skin Zipper Door Skinning ToolFeatures and Benefits New Air Hammer driven door skinning tool that skins doors in less than 10 minutes using Skin Zipper’s self lubricating reinforced Nylon head that will crimp regular or adhesive bonded skins The Skin Zipper crimps |
$38.97 UPC: |
||
|
Steck Manufacturing 21891 Replacement Head for Skin Zipper Door Skinning ToolFeatures and Benefits The head will skin approximately 10 door skins and is easy to replace when it wears out Self-lubricating reinforced nylon head Crimps regular or adhesive bonded skins Saves the technician arm fatigue and up to 60 min |
$21.97 UPC: |
||
|
Steck Manufacturing 21910 Car and Light Truck Door Spring ToolFeatures and Benefits: Safest tool available for coil springs in GM Doors Compresses spring for easy, safe removal Slides safely enclose spring Deep reach version for GM B-Body Heat-treated, high carbon steel |
$20.97 UPC: |
||
|
Steck Manufacturing 23230 Plugweld PliersFeatures and Benefits: Copper alloy backing plate prevents burn thru (weld will not stick to the copper alloy) Plug weld pliers allow you to turn up your heat for better penetration without burn thru, even if you have a pilot hole through th |
$38.97 UPC: |
||
|
Steck Manufacturing 23240 Mig LED LightFeatures and Benefits: LED light attachment for a MIG Torch which is easily adjusted for accurate illumination of the area to be welded A large diameter, easy to push “on/off” button can be actuated with your w |
$32.97 UPC: |
|
|
||||
|
|
