|
|
What are you shopping for? |
|
|
| ||||
|
#0 Steel Conduit Hanger 6H-0B-1 by Thomas and Betts Carlon#0 Steel Conduit Hanger, With Carriage Bolt And Nut, For 3/8 - 1/2 " Rigid Or 1/2 Inches Non-metallic Electrical Metallic Tubing, Upc Polybag. |
$0.50 UPC: 785991022254 |
||
|
#1 Steel Conduit Hanger 6H-1B-1 by Thomas and Betts Carlon#1 Steel Conduit Hanger, With Carriage Bolt And Nut, For 3/4 Inches Rigid Or 3/4 Inches Electrical Metallic Tubing Electrical Metallic Tubing, Upc Polybag. |
$0.59 UPC: 785991022261 |
||
|
1 1/2 45 Degree Elbow With Bell End UA7AHB-CAR by Thomas and Betts CarlonConduit Elbows Pvc - 45 Degree - Standard Radius Schedule 40 With Bell End Size 1-1/2 Inches |
$3.09 UPC: 034481196303 |
||
|
1 1/2 By 1 1/4 Reducing Bushing E950HGR by Thomas and Betts CarlonPvc Conduit Reducers Male X Female Schedule 40/80 Size 1-1/2 Inches X 1-1/4 |
$2.49 UPC: 034481062271 |
||
|
1 1/2 Inch 1 Hole Emt Strap TS105-1 by Thomas and Betts CarlonFor Snap On Type, Steel, Use To Provide Support For Electrical Metallic Tubing As Required By The Nec, Straps Snap On For Easy Mounting And Assembly, Marked With Trade Sizes, Made Of The Heaviest Gauge Plated |
$1.19 UPC: 785991183306 |
||
|
1 1/2 Inch 1 Hole Strap HS105-1 by Thomas and Betts Carlon1-1/2 Inches 1 Hole Strap, For Rigid, Snap On Type, 12 Gauge Steel, Use Snap On Straps Provide Easy Mounting To Support Rigid And Imc Conduit As Required By The Nwc, Straps Are Marked With Trade Sizes For Easy Identification. |
$1.10 UPC: 785991185089 |
||
|
1 1/2 Inch 2 Hole Emt Strap TS905-1 by Thomas and Betts Carlon2 Hole Electrical Metallic Tubing Strap, For Snap On Type, Steel, Use To Provide Support For Electrical Metallic Tubing As Required By The Nec Where Higher Load Bearing Supports Are Desired, Such As When Securing Electrical Metallic Tubing Along T |
$0.60 UPC: 785991206296 |
||
|
1 1/2 Inch 2 Hole Steel Strap HS905-1 by Thomas and Betts Carlon1-1/2 Inches 2 Hole Steel Strap, Snap On Steel Type, Use Provide Easy Mounting To Support Rigid And Imc Conduit As Requried By The Nec Where Higher Load Bearing Supports Are Desired. |
$0.60 UPC: 785991185133 |
||
|
1 1/2 Inch 90 Degree Rigid Elbow TRE112-1 by Thomas and Betts Carlon1-1/2 Inches 90 Degree Rigid Conduit Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Rigid Or Imc Conduit. |
$20.19 UPC: 785991185997 |
||
|
1 1/2 Inch Clamp Connector NC051-1 by Thomas and Betts Carlon1-1/2 Inches Clamp Type Connector, Twin Screw, Die Cast Zinc, Used To Terminate Type Se Cable Or Type Nn Cable To A Box Or Enclosure, Ul And Csa Approved. |
$4.79 UPC: 785991184624 |
||
|
1 1/2 Inch Conduit Locknut LN105-1 by Thomas and Betts Carlon1-1/2 Inches Conduit Steel Locknut, Upc Polybag. |
$0.79 UPC: 785991022490 |
||
|
1 1/2 Inch Emt 90 Degree Elbow TTE112-1 by Thomas and Betts Carlon1-1/2 Inches Electrical Metallic Tubing 90 Degree Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Electrical Metallic Tubing Conduit, Ul Listed. |
$9.49 UPC: 785991185935 |
||
|
1 1/2 Inch Emt Cmp Connector TC215-SC-1 by Thomas and Betts Carlon1-1/2 Inches Electrical Metallic Tubing Compression Connector, Rain Tight And Concrete Tight, Die Cast Zinc, Use To Secure And Terminate Electrical Metallic Tubing To A Knockout In A Concrete Tight Box Or Damp Location, Ul And Csa Listed. |
$4.49 UPC: 785991184167 |
||
|
1 1/2 Inch Emt Screw Connector TC225-SC-1 by Thomas and Betts Carlon1-1/2 Inches Electrical Metallic Tubing Set Screw Type Connector, Concrete Tight, Die Cast Zinc, Use To Secure And Terminate Electrical Metallic Tubing To A Knockout In A Concrete Tight Box Or Dry Location. |
$2.89 UPC: 785991079296 |
||
|
1 1/2 Inch Galvanized Coupling TRC112-1 by Thomas and Betts Carlon1-1/2 Inches Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or Imc Conduit, Ul Listed. |
$4.99 UPC: 785991185584 |
||
|
1 1/2 Inch Insulated Grounding Brushing BG205A-1 by Thomas and Betts CarlonTin-plated Open-type Lug, Dual Rated For Cu-al Conductors, Thermoplastic Liners Rated 105 Degree C. , Die Cast Zinc, Used To Provide A Smooth, Well-rounded Bearing Surface For Wire Or Cable At The End Of Thre |
$8.49 UPC: 785991184877 |
||
|
1 1/2 Inch offset Nipple HO225-1 by Thomas and Betts Carlon1-1/2 Inches Rigid Offset Nipple, Die Cast Zinc, Use To Provide An Offset Connection Between 2 Boxes, Cabinets, Or Enclosures. |
$7.19 UPC: 785991185041 |
||
|
1 1/2 Inch Plastic Bushing BU505-1 by Thomas and Betts Carlon105 Degree C Flame Retardant, Thermoplastic, Use To Provide A Smooth, Well Rounded Bearing Surface For Wires Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The Nec, Ul And Csa Listed |
$0.59 UPC: 785991206166 |
||
|
1 1/2 Inch Pvc C Conduit Body E987H-CAR by Thomas and Betts CarlonPvc Conduit Bodies Type C Schedule 40/80 Size 1-1/2 Inches |
$7.39 UPC: 034481065050 |
||
|
1 1/2 Inch Univ Pipe Clamp Z703 1 1/2 by Thomas and Betts CarlonSuper Strut, 1-1/2 Inches Universal Pipe Clamp, For Emt, Imc And Grc Pipe, Nominal Size 1-1/2 Inches, Fits Od 1.740 - 1.900, Hanging Load Rating 800 Lb, Gold Galvanized. |
$2.29 UPC: 075114013963 |
||
|
1 1/2 Nm 2 Hole Strap Pack of 5 E977HC-CTN by Thomas and Betts CarlonConduit Clamps Pvc/non-metallic Two Holes Gray Size In.=1-1/2 Pack Of 5 |
$2.59 UPC: 034481024972 |
||
|
1 1/2 Sch40 45 Elbow UA7AH-CAR by Thomas and Betts CarlonConduit Elbows Pvc - 45 Degree - Standard Radius Schedule 40 Size 1-1/2 Inches |
$2.69 UPC: 034481060659 |
||
|
1 1/2 Sch40 90 Elbow UA9AH-CAR by Thomas and Betts CarlonConduit Elbows Pvc - 90 Degree - Standard Radius Schedule 40 Size 1-1/2 Inches |
$2.99 UPC: 034481060451 |
||
|
1 1/2 Sch40 Female Adapter E942HR-CTN by Thomas and Betts CarlonPvc Female Conduit Adapters Schedule 40 Size 1-1/2 Inches |
$1.29 UPC: 034481062455 |
||
|
1 1/2 Sch40 Standard Coupling E940HR-CTN by Thomas and Betts CarlonPvc Conduit Couplings Socket Schedule 40 Standard Size 1-1/2 Inches |
$0.89 UPC: 034481061052 |
||
|
1 1/2 Sch40 Terminal Adapter E943HR-CTN by Thomas and Betts CarlonPvc Conduit Terminal Adapters Schedule 40 Size 1-1/2 Inches |
$0.99 UPC: 034481062059 |
||
|
1 1/2 Sch80 90 Elbow UB9AH-CAR by Thomas and Betts CarlonConduit Elbows Pvc - 90 Degree - Standard Radius Schedule 80 Size 1-1/2 Inches |
$9.69 UPC: 034481063254 |
||
|
1 1/2 Service Entrance Caps Non Metallic E998H-CTN by Thomas and Betts CarlonService Entrance Caps Pvc - Non Metallic Schedule 40/80 Size Ins.=1-1/2 |
$7.59 UPC: 034481066125 |
||
|
1 1/2 Type Lb Pvc Conduit Body E986H-CAR by Thomas and Betts CarlonPvc Conduit Bodies Type Lb Schedule 40/80 Size 1-1/2 Inches |
$5.69 UPC: 034481065456 |
||
|
1 1/2 Type T Pvc Conduit Body E983H-CAR by Thomas and Betts CarlonPvc Conduit Bodies Type T Schedule 40/80 Size 1-1/2 Inches |
$7.59 UPC: 034481066057 |
|
|
||||
|
|
