|
|
What are you shopping for? |
|
|
| ||||
|
USP LUMBER 1-1/2 X 3 Safety Plates* Used to protect and prevent accidental nailing into electrical and plumbing lines that pass through framing members * No nails required * 20 gauge galvanized steel * 1-1/2” X 3” * 200 per box *** Sold in packs of 200 |
$56.36 UPC: 045073510087 |
||
|
USP LUMBER 1-3/4 X 9-1/2 Joist Hanger* Connects I-joist to header * Uses (12) 10d nails,, into header,, and (2) 10d x 1-1/2” nails,, into joist * Patent 5,,217,,317 & # 5,,564,,248 * 1-3/4” x 9-1/2” |
$4.01 UPC: 081942032694 |
||
|
USP LUMBER 1-9/16 Rafter Ties* Used to resist wind and seismic loads on rafters and trusses * Also used as a general purpose tie for strong back attachments or to connect any wood cross members * 1-9/16” * Rafter 4-N9 * 100 per box *** Sold in packs of 100 |
$35.77 UPC: 081942029076 |
||
|
USP LUMBER 1/2 Steel Plywood Clips* Used on plywood seams to provide structural support and reduce normal deflection between panels * Ideal for roof sheathing or panelized construction of any type where joints do not occur over solid wood framing * 18 gauge galvanized steel * 250 per |
$21.59 UPC: 081942013273 |
||
|
USP LUMBER 12 Plate Straps* Can be used as multi-purpose connectors for splicing intersecting wood joints and other general purpose applications * 12 gauge galvanized steel * 12” * 50 per box *** Sold in packs of 50 |
$69.63 UPC: 081942032229 |
||
|
USP LUMBER 12 Post T Strap* Used to reinforce and join columns or posts to a beam or header * Designed with staggered nail patterns to give proper nail spacing,, or they may be bolted to satisfy heavy duty requirements * 12 gauge galvanized steel * 12” |
$8.77 UPC: 031107797807 |
||
|
USP LUMBER 16 Insulation Supports* Used to hold insulation in place between floor or roof framing * Easily installed - just push in place * Chisel pointed ends assure snug fit * Insulation supports are spaced every 12 to 16 inches * 13 gauge springy steel * For 16” on center spacing |
$16.18 UPC: 081942026396 |
||
|
|
USP LUMBER 17 Plate Straps* Can be used as multi-purpose connectors for splicing intersecting wood joints and other general purpose applications * 12 gauge galvanized steel * 17” *** Sold in packs of 25 |
$40.77 UPC: 081942008941 |
||
|
USP LUMBER 2 Framing Anchor* Multi-purpose anchor designed for connecting framing members * Increases structural strength of wood joints by eliminating toe-nailing * Designed with offset nail patterns to eliminate splitting and allow installation on both sides of member * 16 g |
$35.06 UPC: 081942027553 |
||
|
USP LUMBER 2 X 10 Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$53.87 UPC: 081942080398 |
||
|
|
USP LUMBER 2 X 4 Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$54.03 UPC: 081942080367 |
||
|
USP LUMBER 2 X 4 Mending Plate* Used to join flat surfaces to two or more wood members * Prong plates with straight prongs * These plates are not intended for structural use or in truss assembly * No load ratings are assigned * G60 galvanizing * 22 gauge steel * 2” x 4” |
$1.93 UPC: 081942031505 |
||
|
USP LUMBER 2 X 5 Nail Plates* Used as general purpose ties or straps in a variety of wood joint applications * They can be used to repair or increase structural integrity of damaged or split wood members * 20 gauge galvanized steel * 100 per box * 2” X 5” *** Sold in packs of |
$45.79 UPC: 031107654803 |
||
|
USP LUMBER 2 X 6 Galvanized Zinc Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$69.34 UPC: 081942091950 |
||
|
|
USP LUMBER 2 X 6 Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$79.19 UPC: 081942080374 |
||
|
|
USP LUMBER 2 X 6 Triple Zinc Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$108.04 UPC: 081942101468 |
||
|
|
USP LUMBER 2 X 8 Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$48.58 UPC: 081942080381 |
||
|
USP LUMBER 2-1/16' X 4-1/8 X 34-3/4 Purlin Anchor* Designed to meet seismic load requirements when connecting wood purlins and beams to concrete or masonry * May also be used as a post base connector * Loads are based on a minimum of 4” embedment into concrete and should be reduced accordingly for |
$13.30 UPC: 081942046134 |
||
|
|
USP LUMBER 24 Insulation Supports* Used to hold insulation in place between floor or roof framing * Easily installed,, just push in place * Chisel pointed ends assure snug fit * Insulation supports are spaced every 12 to 16 inches * 13 gauge springy steel * For 16” on center spacing |
$21.94 UPC: 081942026419 |
||
|
|
USP LUMBER 24 Plate Straps* Can be used as multi-purpose connectors for splicing intersecting wood joints and other general purpose applications * 12 gauge galvanized steel * 24” *** Sold in packs of 25 |
$75.32 UPC: 081942008965 |
||
|
USP LUMBER 3 Framing Anchor* Multi purpose anchor designed for connecting framing members * Increases structural strength of wood joints by eliminating toe-nailing * 18 gauge galvanized * 100 per box * 3” *** Sold in packs of 100 |
$64.61 UPC: 031107503408 |
||
|
|
USP LUMBER 3 X 5 Nail Plates* Used as general purpose ties or straps in a variety of wood joint applications * They can be used to repair or increase structural integrity of damaged or split wood members * 20 gauge galvanized steel * 3-1/8” x 5” *** Sold in packs of 100 |
$54.74 UPC: 031107655206 |
||
|
|
USP LUMBER 3 X 6 Mending Plate* Used to join flat surfaces to two or more wood members * Prong plates with straight prongs * These plates are not intended for structural use or in truss assembly * No load ratings are assigned * G60 galvanizing * 22 gauge steel * 3” x 6” |
$2.39 UPC: 081942031512 |
||
|
|
USP LUMBER 3 X 7 Nail Plates* Used as general purpose ties or straps in a variety of wood joint applications * They can be used to repair or increase structural integrity of damaged or split wood members * 20 gauge galvanized steel * 3-1/8” x 7” *** Sold in packs of 100 |
$76.24 UPC: 031107655404 |
||
|
USP LUMBER 3-1/16 X 3-1/16 X 1-1/4 Corner Braces* This multi-purpose bracket is designed to reinforce intersecting wood members in light duty application * Can be nailed to concrete or wood floors and posts * 12 gauge galvanized steel * 3-1/16” x 3-1/16” x 1-1/4” * 8-16d nail schedule *** Sold in |
$63.17 UPC: 031107508007 |
||
|
USP LUMBER 3-5/8 X 3-5/8 X 2 Multi-Purpose Braces* Designed to reinforce intersecting wood members in light duty applications * They can be nailed to concrete or wood floors and posts * Made from 12 gauge galvanized steel * 25 per box * 3-5/8” x 3-5/8” x 2” *** Sold in packs of 25 |
$65.82 UPC: 081942061472 |
||
|
|
USP LUMBER 3/4 Steel Plywood Clips* Used on plywood seams to provide structural support and reduce normal deflection between panels * Ideal for roof sheathing or panelized construction of any type where joints do not occur over solid wood framing * 18 gauge galvanized steel * 3/4” ** |
$28.86 UPC: 081942013297 |
||
|
USP LUMBER 4 X 4 Adjustable Post Anchors* Used to secure post to existing concrete or wood floor * Secured to floor with either 1/2” bolt or concrete nails * For heavy-duty applications,, use nails and bolts togheter * Slotted bolt hole in base provides adjustability during installation * |
$11.01 UPC: 081942011927 |
||
|
USP LUMBER 4 X 4 Column Base* Designed for heavy duty post or column base connections * Column base can be set in position prior to pouring concrete to assure proper alignment and installation * Designed for structural integrity where wind and sisemic loads are important consid |
$17.86 UPC: 045073430170 |
||
|
|
USP LUMBER 4 X 4 Joist Hangers* The SU series of joist hangers offer both standard nailing into the joist or the alternate nailing feature that accepts a standard 10d common nail installed into both the joist and the header,, giving higher load and uplift values. * Ideal for fram |
$97.21 UPC: 081942094005 |
|
|
||||
|
|
