3M Command Traditional Hook Medium 1 set

Directions: Follow Instructions Carefully! Save Instructions For Clean Removal In The Future. To Mount: 1. Clean Surface With Isopropyl Rubbing Alcohol, Wipe Lightly, Let Dry. Do Not Use Household Cleaners. 2. Separate Strips. Remove Red Liners. Apply Strips. Press Firmly. 3. Remove Black Liners. Mount Hook And Press Entire Hook Firmly For 30 Seconds. 4. Wait 1 Hour. Save Instructions For Future Removal. To Remove: 1. Slide Hook Cover Up To Reveal Base And Removal Tab. 2. To Prevent Base From Snapping Your Fingers, Hold Base As Shown. Do Not Press Base Against Wall. Grab Tab. Never Pull The Strip Out At An Angle. Strip Could Break Or Damage The Surface. 3. Slowly Slide The Tab Straight Down Against The Wall, Stretching The Strip At Least 12 Inches Until Base Release From The Wall. Apply To Surfaces Above 50 Degrees F (10 Degrees C). Adhesive Could Lose Adhesion Above 105 Degrees F (40 Degrees C).